ニュース
新製品
on05/03/2021
[New] 30-125W AC/DC Power Supply with Peak Power

 

 
The new AC/DC product series TAD30-P, TAD65-P, and TAD125 can provide high peak power to meet needs of temporary high load situations in industrial and communication applications, such as electric tools, electric beds/chairs, printers, and other electric motors equipment. The new series provide a flexible combination of electrical and thermal performance, that provide up to 10 seconds, 1.3 times the peak load tolerance, and supports operation in a natural air-cooled environment. This can effectively reduce the development cost due to not necessary to select a high output power module to cover the peak power that occurs in the short-term.
The operating temperature range of the series is -40 to +85 °C, and it has high conversion efficiency. Take TAD125 series for instance, the conversion efficiency is up to 92%. High conversion efficiency means higher reliability and reduced system heat dissipation requirements. These series have low standby power consumption, complete protection functions, 3000VAC reinforced isolation, and up to 5000 meters operating altitude.
TAD30-P, TAD65-P, and TAD125 are certificated by IEC/ EN/ UL 62368-1.
 
 

 

Features -  
  Peak Power
■  Low Standby Power Consumption
■  Built-in EN 55032 EMI Class B Filter
■  Operating Altitude Up To 5000m
■  3000VAC Reinforced Insulation
 
 

 

-- Click Here for Further Information --
TAD30-P    TAD65-P    TAD125

 

本サイトは、利便性向上を目的としてクッキー機能を適用しています。 クッキーを許可しない場合は、最高レベルのプライバシーを設定したら、クッキーを拒否できます。ただし、お客様がブラウザ上でクッキーの機能を無効にされたら、当社「サイト」は一部閲覧できない可能性があります。

OK